Dead pixel
Permanently off. It stays black on white, red, green and blue. Usually a failed transistor, and rarely recoverable with software.
- Always black
- Emits no light at all
- A warranty case, not a repair
Find out in under a minute whether that dot on your screen is dead or just stuck — then run a high-frequency repair pattern over it. Nothing is uploaded and nothing is installed.
Works on monitors, laptops, phones, tablets, TVs and projectors.
Start with a flat color test. If the dot is bright, move to the fixer. If the whole panel looks wrong — banding, blur, uneven light — run the full monitor check.
Full-screen solid colors that expose dead, stuck and hot pixels. Nine colors, arrow-key cycling, works on any device.
Run the test Most usedA draggable square that cycles colors at up to 60 Hz over the faulty pixel. Most stuck pixels respond within 10 to 30 minutes.
Open the fixerGradients, banding, uniformity, backlight bleed, ghosting, text clarity and refresh rate. The full check-up in one page.
Test the monitorMost false alarms are dust, fingerprints or a browser running at the wrong zoom level. Four steps remove both.
A microfibre cloth and a drop of distilled water. Dust looks exactly like a dead pixel until you wipe it.
Set the display to its native resolution and 100% zoom. Scaled output can hide defects or invent them.
Black reveals stuck pixels. White reveals dead ones. Red, green and blue isolate a single sub-pixel.
Note where the dot sits. You will need to place the fixer square exactly over it.
They look similar on a dark screen and behave very differently under repair.
Permanently off. It stays black on white, red, green and blue. Usually a failed transistor, and rarely recoverable with software.
Frozen on one color. It shows as a bright red, green, blue or white dot on dark scenes and can often be exercised back to life.
An LCD sub-pixel is a tiny liquid-crystal shutter. When it stays in one state for a long time, the crystal can lock up. Rapidly changing the voltage across it — exactly what a fast color cycle does — can free it again. It is not magic and it does not work on every panel, but it costs nothing to try before a warranty claim.
Short answers, no hype.
A truly dead pixel — one that stays black on every background — is a hardware failure and cannot be fixed with software. A stuck pixel, which stays lit in one color, can sometimes be revived by cycling it rapidly. That is what the fixer does.
Twenty minutes is a reasonable first attempt. If nothing changes, run it for another twenty with a different pattern. Most successes happen within the first hour. Beyond that, the odds drop sharply and it is time to consider warranty.
No. A stuck pixel still receives power and is frozen on one color, usually red, green, blue or white. A dead pixel receives no power and stays black. Stuck pixels are the ones with a realiztic chance of repair.
The fixer only changes colors on the display, which is what the panel does during normal use. It does not touch the hardware, overdrive the backlight or write anything to the panel. The real risk is discomfort from flashing light, so take breaks and avoid it if you are photosensitive.
One minute to know what you are dealing with. Ten minutes to try the cheapest fix available.